Markers disappear when apply Profile Types Filter

Hi,
when we apply Profile Types Filter and we select the Custom Field ID Filter, the map shows correctly the selector of different values for the Custom Field ID selected.
The problem is that any value that we select, there's no markers shown on the map. Also if all options are active no markers are shown on the map.
If the Profile Type Filter is not activated (Option NO) but Custom Field ID Filter remains informed, also the markers aren't shown on the map.
If finally we don't activate the Profile Type Filter (OPtion NO) and Custom Field ID Filter remains empty the markers are shown correctly. Unfortunately without any filter available.

As is informed on the admin area this feature is on beta,... but do you recommend any option or workaround to be available this feature showing correctly the markers??

Thanks in advance for your help.

KR
David

Hi,

Sorry Im confused
Can you provide a short step by step to reproduce the issue.
Can you reproducte the issue at
www.geommunity3.com/index.php?option=com...icle&id=5&Itemid=217
?

Just to be sure:
If both are shown on the map (field and profile filters):
For the markers to show , you need both to be enabled.

Hi,
attached some screenshots about what happens:

1. By default we work only with Business profiles (type 2)
2. Without Filter applied (Normal situation)
3. We select Filter by Profile ID and we apply it.
4. What's shown as result. (No marker...)

additional screenshots...

Sorry... I don't know why some screenshots are not uploaded.

KR

David

Finally... I hope!. In a zip file.